一起答
单选

利用VLAN技术可以把物理上连接的网络从逻辑上划分为多个不同的虚拟子网,可以对各个子网实施不同的管理策略。图5-4示意了交换机SW1和交换机SW2相连把6台计算机配置成2个VLAN。阅读SW1的部分配置信息,为(56)空缺处选择合适的命令/参数,实现交换机SW1的正确配置。

SW1(vlan)#(56)SW1 #show vtp status  VTP version:2  Configuration Revision:0  Maximum VLANs supported locally:64  Number of existing VLANs:1  VTP Operating Mode:Server  VTP domain Name :Server1  VTP Pruning Mode :Enable  VTP V2 Mode :Disabled AtTP Traps Generation :Disabled

  • A.vtp client
  • B.vtp Server1
  • C.vtp Server
  • D.vtp domain
参考答案
查看试卷详情
相关试题
  1. (95)

    • A.time
    • B.power
    • C.speed
    • D.overhead
  2. (94)

    • A.burdened
    • B.influenced
    • C.destroyed
    • D.mitigated
  3. (92)

    • A.many
    • B.almost
    • C.a lot of
    • D.nearly
  4. (93)

    • A.most
    • B.many
    • C.much
    • D.a lot
  5. (90)

    • A./etc/nis.conf
    • B./etc/dns.conf
    • C./ere/named.conf
    • D./etc/resolv.conf
  6. In the following essay, each blank has four choices. Choose the most suitable one from the four choices and write down in the answer sheet.

     The key to SNMP(71)is its simplicity. It has a small command set that does a good job of collecting information from(72)any network device. In a SNMP environment,(73)of the work is handled by the network management system. Devices that are being managed are not(74)with processing(75)that might affect their performance.

    • A.popularity
    • B.function
    • C.efficiency
    • D.power
  7. (89)

    • A./ete/named.conf
    • B./etc/host.conf
    • C./etc/dns.conf
    • D./etc/resolv.conf
  8. (87)

    • A./etedserviees.conf
    • B./etc/metd.conf
    • C./etc/services
    • D./etc/host.conf
  9. (88)

    • A./etc/hosts.allow
    • B./etc/hosts.denv
    • C./etc/access.conf
    • D./etc/inetd.conf
  10. Linux是目前较为流行的网络操作系统,如同Unix操作系统一样,它也可以通过手工编辑配置文件达到对系统进行配置的目的。在Linux网络配置文件中的几个较为重要的配置文件如下: (61)用于存放本机主机名以及经常访问IP地址的主机名,在对IP进行域名解析时,可以设定为先访问该文件,再访问DNS,最后访问NIS。Linux下存在两个网络服务守候进程的配置文件。通过修改(62),可以达到关闭或开放某种对应服务的目的。以FTP服务为例,将文件中“#FTP Stream TCP nowait root/usr/sbin/tcpd in.ftpd-1-a”前的“#”去掉就可以开启FTP服务。修改(63),可对允许访问本机提供服务的主机范围进行限制。例如在文件中加入“in.ftpd:202.112.207.0/255.255.255.0”就可以允许202.112.207.0子网的用户主机访问本机提供的FTP服务。在Linux下进行DNS服务时,(64)是控制解析器配置的最主要文件,规定了解析使用的服务,以及服务的顺序,比如可以通过在文件中加入“Order hosts,DNS,NIS”设定前面提到的域名解析顺序,(65)是配置DNS服务器的主要文件,指定了本机使用的域名服务器以及多个服务器之间查找的顺序等。

    • A./etc/local.conf
    • B./etc/network
    • C./etc/hosts
    • D./etc/host.conf