一起答
单选

下面给出了一些软件编码的原则,其中错误的是(9)。

  • A.代码应当划分成内聚度高、富有意义的功能块
  • B.编程时要采用统一的标准和约定,注意命名规则、格式和多加注释,降低程序的复杂性
  • C.尽量选择适用于项目的应用领域的编程语言
  • D.代码应该最大限度的追求高的效率
参考答案
查看试卷详情
相关试题
  1. (70)

    • A.flow
    • B.admission
    • C.traffic
    • D.time
  2. (71)

    • A.path
    • B.rout
    • C.circuit
    • D.way
  3. (69)

    • A.collision
    • B.congestion
    • C.drop
    • D.delay
  4. (68)

    • A.packets
    • B.cells
    • C.message
    • D.files
  5. In low-speed network, it is usually adequate to wait for congestion to occur and then react to it by telling the source of packets to slow down. In high-speed networks, this approach often works poorly, because in the(71)between sending the notification and notification arriving at the source, thousands of additional(72)may arrive. In ATM network , a major tool for pre- venting(73)is(74)control. When a host wants a new virtual(75), it must describe the traffic to be offered and the service expected.

    • A.interval
    • B.time
    • C.slot
    • D.delay
  6. (66)

    • A.X.25
    • B.ATM
    • C.FDDI
    • D.SMDS
  7. (64)

    • A.The hub
    • B.The bridge
    • C.The router
    • D.The proxy
  8. (65)

    • A.Ethernet
    • B.Token Bus
    • C.Token Ring
    • D.DQDB
  9. (63)

    • A.ISO
    • B.ANSI
    • C.CCITT
    • D.IEEE
  10. For each blank, choose the best answer from the four choices and write down on the answer sheet.

      (66) is a six bytes OSI layer 2 address which is burned into every networking device that provides its unique identity for point to point communication.

      (67) is a professional organization of individuals in multiple professions which focuses on effort on lower-layer protocols.

      (68) functions with two layers of protocols. It Can connect networks of different speeds and can be adapted to an environment as it expands.

      (69) is the popular LAN developed under the direction of the IEEE 802.5.

      (70) is the popular backbone technology for transmitting information at high speed with a high level of fault tolerance which is developed under the direction of ANSI.

    • A.The MAC address
    • B.The IP address
    • C.The subnet address
    • D.The virtual address