一起答
单选

以下下关于VoIP的描述不正确的是(60)。

  • A.VoIP系统一般由IP电话终端、网关(Gateway)、网(关)守(Gatekeeper)、网管系统、计费系统等几部分组成
  • B.在实现方式上,VoIP有电话机到PC、PC到电话机和PC到PC等3种方式
  • C.VoIP的关键技术包括信令技术、编码技术、实时传输技术、服务质量(QoS)保证技术以及网络传输技术等
  • D.VoIP的核心与关键设备是IP电话网关
参考答案
查看试卷详情
相关试题
  1. (70)

    • A.flow
    • B.admission
    • C.traffic
    • D.time
  2. (71)

    • A.path
    • B.rout
    • C.circuit
    • D.way
  3. (69)

    • A.collision
    • B.congestion
    • C.drop
    • D.delay
  4. (68)

    • A.packets
    • B.cells
    • C.message
    • D.files
  5. In low-speed network, it is usually adequate to wait for congestion to occur and then react to it by telling the source of packets to slow down. In high-speed networks, this approach often works poorly, because in the(71)between sending the notification and notification arriving at the source, thousands of additional(72)may arrive. In ATM network , a major tool for pre- venting(73)is(74)control. When a host wants a new virtual(75), it must describe the traffic to be offered and the service expected.

    • A.interval
    • B.time
    • C.slot
    • D.delay
  6. (66)

    • A.X.25
    • B.ATM
    • C.FDDI
    • D.SMDS
  7. (64)

    • A.The hub
    • B.The bridge
    • C.The router
    • D.The proxy
  8. (65)

    • A.Ethernet
    • B.Token Bus
    • C.Token Ring
    • D.DQDB
  9. (63)

    • A.ISO
    • B.ANSI
    • C.CCITT
    • D.IEEE
  10. For each blank, choose the best answer from the four choices and write down on the answer sheet.

      (66) is a six bytes OSI layer 2 address which is burned into every networking device that provides its unique identity for point to point communication.

      (67) is a professional organization of individuals in multiple professions which focuses on effort on lower-layer protocols.

      (68) functions with two layers of protocols. It Can connect networks of different speeds and can be adapted to an environment as it expands.

      (69) is the popular LAN developed under the direction of the IEEE 802.5.

      (70) is the popular backbone technology for transmitting information at high speed with a high level of fault tolerance which is developed under the direction of ANSI.

    • A.The MAC address
    • B.The IP address
    • C.The subnet address
    • D.The virtual address