一起答
单选

The purpose of PSC is ____.

  • A.to check and inspect foreign ships
  • B.to verify the condition of a ship in compliance with requirements of international conventions
  • C.to fine ships
  • D.to detain ships
试题出自试卷《海船船员考试轮机部三管轮模拟题6(轮机英语)》
参考答案
查看试卷详情
相关试题
  1. Before being used the fuel service tank should be drained of _____.

    • A.soda solution
    • B.mechanical impurities
    • C.ballast
    • D.water and residuals
  2. Strainers are commonly used in hydraulic systems to _____.

    • A.protect the pump from fine soluble contaminants
    • B.prevent solid particles from entering the pump
    • C.prevent solid particles from entering the filter
    • D.protect the directional control valves
  3. The scavenging air ports are located at _____ that they are just exposed by the upper edge of the piston when the piston is in the bottom dead center position.

    • A.so a height
    • B.such a height
    • C.so high
    • D.such high
  4. If emergency welding repairs must be made to the upper area of a fuel tank, the tank and/or adjacent compartments may need to be _____.

    • A.gas freed
    • B.inerted
    • C.filled with water
    • D.all of the above as necessary
  5. Setting a sealing equipment astern on the tailshaft can’t ____.

    • A.prevent the seawater from intergrating
    • B.prevent the lube oil from running out of the outside aboard
    • C.strengthen the intencity of the sterntube
    • D.prevent the mud and sand from entering the lube oil system
  6. Excessive valve lash in an auxiliary diesel engine will cause the valves to open________.

    • A.later and close sooner
    • B.sooner and close later
    • C.sooner and close sooner
    • D.later and close later
  7. The latent heat of evaporation is dissipated in the _____ in a compression refrigeration system.

    • A.evaporator
    • B.condenser
    • C.expansion valve
    • D.compressor
  8. The most critical part of the bunkering operations, which can result in an oil spill, is when the _____.

    • A.hose joints are made up
    • B.tanks are being topped off
    • C.system is being lined up
    • D.pumping operation is first started
  9. A butterfly valve consists basically of a disc pivoted across the bore of a ring body having the same radial dimensions as the pipe in which it is fittedAccording to the above sentence, which of the following statements is not true?

    • A.The diameter of a disc is the same as the outer diameter of the pipe
    • B.We can infer that the valve is opened or closed by rotating the spindle
    • C.A butterfly valve comprises a disc and a ring body
    • D.The profile of the butterfly valve is a ring body
  10. Worn out ring grooves should be _____ to standard dimension after being welded.

    • A.machined
    • B.bored
    • C.honed
    • D.drilled