一起答
单选

It is usual to identify the fluids in pipes by bands of paint at intervals, and the engineer should familiarize himself with the code in useAccording to the above sentence, which of the following statements is true?

  • A.People can know the types of fluids in pipes by feeling with hands
  • B.There are series of rings painted in the pipes to show various fluids
  • C.Engineers should wear cards standing for ranks
  • D.Engineer knows his own code very well
参考答案
查看试卷详情
相关试题
  1. Safe welding practice requires .

    • A.checking the area for items that may catch fire
    • B.that a fire watch be posted
    • C.checking for the explosive gases
    • D.all of the above
  2. The lowest temperature at which the vapor formed from a liquid ignites and continues to burn steadily in the presence of an ignition source is called the _____.

    • A.flash point
    • B.fire point
    • C.upper explosive limit
    • D.lower explosive limit
  3. The fuel injection system is very important, so any trouble of it will _____ the operation of the main engine.

    • A.be affected
    • B.affect
    • C.be effected
    • D.effect
  4. _____ is/are the legal survey institution(s) that stated by PRC.

    • A.Ship Survey Bureau
    • B.CCS
    • C.Maritime Safety Administration
    • D.all of the above
  5. The tailshaft sealing arrangement found a little lube oil leaky and caused a lot of seawater into the bearing, the step should be taken as a makeshift is____.

    • A.dropping lube oil for lubrication, reducing the pollution to the sea
    • B.setting a temporary gravity oil tank and enhanced the position properly
    • C.lubricating with the used lube oil
    • D.lubricating with the fresh water and navigation in a lower speed
  6. A vessel is required to carry an Oil Record Book Part I to log entries in the book regarding the _____.

    • A.discharge of ballast or cleaning water from fuel tanks
    • B.sounding levels of all fuel tanks on a daily basis
    • C.grade and specific gravity of all fuel oil carded
    • D.fuel consumption rates on a weekly basis
  7. The main purpose of port State control is not to___________.

    • A.prevent an unsafe ship proceeding to sea
    • B.prevent a ship threatening the marine environment
    • C.fine the ships
    • D.confirm a safe sailing
  8. ____ shall set security levels and provide guidance for protection from security incidents.

    • A.The Contracting Governments
    • B.The Port Authorities
    • C.The Master
    • D.The Company Security
  9. If a DC motor runs hot, the cause may be _____.

    • A.high mica condition
    • B.low ambient temperature
    • C.clogged ventilation ducts
    • D.an open in the shunt field
  10. It is well known that the whole power distribution of the ship’s electrical services mainly depend on the______.

    • A.sub-boards
    • B.main switchboards
    • C.emergency switchboards
    • D.distribution boards