一起答
单选

The single acting cylinder is the simplest form. where pressure is applied to the full area of the piston head to move the load through piston rod extensionThe load causes rod _____ when the drive pressure is released.

  • A.contraction
  • B.retraction
  • C.expansion
  • D.shrinkage
参考答案
查看试卷详情
相关试题
  1. If the firing pressures in a diesel engine are high, although the exhaust temperatures are normal, the cause may be .

    • A.early injection timing
    • B.worn orifices in the injection nozzles
    • C.worn or scored cylinder liners
    • D.using a fuel with too low of a cetane number
  2. Which of the substances listed is satisfactorily removed from the fuel by a centrifugal oil purifier?

    • A.Carbon particles
    • B.Lube oil
    • C.Gasoline
    • D.Diesel fuel
  3. When a clarifier is running the impurities and water collect at the bowl _____.

    • A.center
    • B.periphery
    • C.inlet
    • D.upper parts
  4. Which of the following statements concerning fuel atomization in a diesel engine cylinder is correct?

    • A.The greater the atomization, the greater the penetration
    • B.The greater the atomization, the less the penetration
    • C.The degree of atomization has nothing to do with the degree of penetration
    • D.Atomization and penetration are one and the same
  5. Oil is supplied to the cylinder wall and _____ by means of mechanical lubricators.

    • A.the cylinder cover
    • B.the piston rings
    • C.the piston crown
    • D.the piston skirt
  6. The development goals for a large marine engine are many often interact and in some cases even with each other.

    • A.conflict
    • B.accord
    • C.harmonize
    • D.struggle
  7. Starting air for auxiliary engines may be taken directly from the main reservoirs or through _____.

    • A.an auxiliary reservoir
    • B.a controlling air bottle
    • C.an emergency air compressor
    • D.a main air compressor
  8. The exhaust boilers are used to recover some of _____ carried in the exhaust gas from the main engine.

    • A.water
    • B.oil
    • C.heat
    • D.steam
  9. In the engine department, the _____ is looked upon to provide the leadership that is needed.

    • A.captain
    • B.chief engineer
    • C.chief officer
    • D.chief motorman
  10. The accumulation of air and other non-condensable gases in a refrigeration system will _____.

    • A.cause a loss of the liquid seal
    • B.create a vapor lock in the liquid receiver
    • C.collect in the condenser
    • D.cause foaming of the oil in the crankcase