一起答
单选

The clearance volume for a single stage compressor is defined as the space created between the _____.

  • A.top of the piston and bottom side of head, with the piston at BDC
  • B.piston and head, including the space around the piston to the top of the upper ring and under the valves, with the piston at TDC
  • C.bottom of the piston and bottom side of the head at TDC, regardless of upper ring location and valve placement
  • D.top of the piston and bottom side of the head at TDC as compared to that which exists between the top of the piston and bottom side of head at BDC
参考答案
查看试卷详情
相关试题
  1. The burning of the fuel adds more heat to the air charge, causing it to expand and force the engine piston to do work on the crankshaftWhat does “it” mean in this sentence?

    • A.the burning
    • B.the fuel
    • C.the air charge
    • D.the engine piston
  2. Which of the following can be used in hydraulic transmission system?

    • A.Hydraulic oil
    • B.Animal oil
    • C.Light oil
    • D.Fuel oil
  3. Under normal operating conditions, the rudder is hydraulically locked unless _____.

    • A.the manual trick wheel is engaged for steering
    • B.the variable stroke pump is off stroke
    • C.a rudder order is given by the control system
    • D.an electric power system failure occurs at the steering gear
  4. Which of the following statements is not true concerning symptom of a fire in the scavenge air box?

    • A.an increase in the exhaust temperature of the affected cylinder
    • B.the turbocharger may surge
    • C.the explosion pressure in all cylinders will rise violently
    • D.smoke from the turbocharger air inlet filter will be seen
  5. If a diesel engines exhaust temperature is abnormally high, the cause could be______.

    • A.too light of a load
    • B.injection timing is too early
    • C.overloading of the engine
    • D.too low of a compression ratio
  6. The power factor is a measure of the phase difference between voltage and current and is expressed as the_____ of the phase angle.

    • A.sine
    • B.cosine
    • C.tangent
    • D.cotangent
  7. Diesel engine mufflers accomplish noise reduction by _____.

    • A.reducing exhaust gas velocity
    • B.increasing the frequency of gas vibration
    • C.the use of long head pipes
    • D.the use of zinc electrodes
  8. “Stand by engine” means _____.

    • A.prepare to stop the engine
    • B.assemble an engine on its bedplate
    • C.make an engine ready for starting
    • D.make an engine run steadily
  9. Which of the fire extinguishing agents listed is the safest to use when combating a class C fire?

    • A.CO2
    • B.Foam
    • C.Water fog
    • D.Soda acid
  10. A fire is considered "under control" when _____.

    • A.all hands are at their fire stations
    • B.all fire-fighting equipment is at the scene
    • C.the fixed systems are activated
    • D.the fire is contained and no longer spreading