单选

All member of the engineering watch shall be familiar with assigned watch-keeping dutiesIn addition, every member shall, with respect to the ship they are serving in have knowledge of Ⅰthe use of appropriate internal communication systemsⅡthe use of GMDSSⅢthe escape routes from machinery spaceⅣthe number location and types of fire-fighting equipment in the machinery spaces.

A.Ⅰ+Ⅲ+Ⅳ
B.Ⅱ+Ⅲ+Ⅳ
C.Ⅲ+Ⅳ
D.Ⅰ+Ⅱ+Ⅲ+Ⅳ

试题出自试卷《海船船员适任证书三管轮模拟试题1(轮机英语)》

参考答案

查看试卷详情

相关试题

Which of the listed devices could be used as a substitute for a ring grooving tool?
- A.Steel brush
- B.Fine emery cloth or steel wool
- C.A section of the removed compression ring
- D.A case hardened scraper
点击查看答案
Which of the following statements is correct for the design and installation of diesel engine cooling water systems?
- A.An alarm device with audible and visible signals is required for all cooling water systems
- B.Propulsion engines with bores over 200 mm are to be fitted with cooling water jackets
- C.Each totally enclosed cooling system shall be provided with a suitable head tank
- D.Drain cocks are to be provided at the lowest points of all cylinder water jackets
点击查看答案
The discharge head of a centrifugal pump will vary directly with the _____.
- A.change in impeller diameter
- B.square of the impeller diameter
- C.cube of the impeller diameter
- D.impeller efficiency for large changes in the size of the impeller
点击查看答案
Ignition failure in an automatically controlled auxiliary boiler could be caused by .
- A.carbon deposits on the flame scanner
- B.high fuel oil temperature
- C.low fuel oil viscosity
- D.high steam pressure
点击查看答案
A moving object will not accelerate or decelerate ______ a force is applied to it.
- A.whether
- B.if
- C.unless
- D.till
点击查看答案
Medium survey should be carried out _____ times during the valid period of the certificate.
- A.2
- B.3
- C.4
- D.1
点击查看答案
The abbreviation ‘M/E’ is used to represent the .
- A.measure equipment
- B.main electrical
- C.my engine
- D.main engine
点击查看答案
A thermostatic expansion valve is properly controlling evaporator superheatAdjusting this valve to lower the superheat will result in a/an _____.
- A.evaporator pressure decrease
- B.evaporator coil over-feed
- C.evaporator capacity increase
- D.expansion valve diaphragm rupture
点击查看答案
In a ordinary cargo crane, _____ is fitted to rotate the crane.
- A.the slewing motor
- B.the lulling motor
- C.the hoisting motor
- D.none of the above
点击查看答案
Which of the following problems represent one possible cause of high lube oil consumption in a four stroke diesel engine?
- A.Worn intake valve guides
- B.Pitted pre-combustion chambers
- C.Loose valve tappets
- D.High exhaust back pressure
点击查看答案