一起答
单选

● 某校园网的地址是 202.100.192.0/18,要把该网络分成 30 个子网,则子网掩码应该是 (54) ,每个子网可分配的主机地址数是 (55) 。

(54)

  • A.  255.255.200.0    
  • B.  255.255.224.0
  • C.  255.255.254.0    
  • D.  255.255.255.0    (55)
  • A.  32  
  • B. 64  
  • C.  510  
  • D.  512
参考答案
查看试卷详情
相关试题
  1. ● 在进行金融业务系统的网络设计时,应该优先考虑 (69) 原则。在进行企业网络的需求分析时,应该首先进行 (70) 。

    (69)

    • A. 先进性     
    • B. 开放性   
    • C. 经济性     
    • D. 高可用性    (70)
    • A. 企业应用分析    
    • B. 网络流量分析
    • C. 外部通信环境调研  
    • D. 数据流向图分析
  2. ● Traditional Internet access methods like dial-up were so slow that host computers wereconnected to the dial-up  (71)   at the customer premise over slow (72)  ports. PPP wasdesigned to run directly over these serial links. But with the advent of broadband Internet (73)technologies such as ADSL and cable modems there has been a considerable increase in thebandwidth delivered to the end users. This means that the host computers at the customerpremise connect to the  (74)    or cable "modem" over a much faster medium such as Ethernet.It also means that multiple (75) can connect to the Internet through the same connection.

  3. ● 无线局域网(WLAN)标准 IEEE802.11g 规定的最大数据速率是 (65) 。 

    (65)

    • A.  1Mb/s     
    • B.  11Mb/s   
    • C.  5Mb/s     
    • D.  54Mb/s
  4. ● 在冗余磁盘阵列中,以下不具有容错技术的是 (68) 。

    (68)

    • A.RAID 0      
    • B.RAID 1
    • C.RAID 3     
    • D.RAID 5
  5. ● 以太网协议中使用了二进制指数后退算法,这个算法的特点是 (62) 。 

    (62)

    • A. 容易实现,工作效率高
    • B. 在轻负载下能提高网络的利用率  
    • C. 在重负载下能有效分解冲突   
    • D. 在任何情况下不会发生阻塞
  6. ● 以下属于万兆以太网物理层标准的是 (63) 。

    (63)

    • A.  IEEE802.3u    
    • B.  IEEE802.3a  
    • C.  IEEE802.3e    
    • D.  IEEE802.3ae
  7. ● 快速以太网标准比原来的以太网标准的数据速率提高了10倍,这时它的网络跨距(最大段长) (64) 。 (64)

    • A. 没有改变     
    • B. 变长了 
    • C. 缩短了     
    • D. 可以根据需要设定
  8. ● 配置 VLAN 有多种方法,下面哪一条不是配置 VLAN 的方法? (60)

    (60)

    • A. 把交换机端口指定给某个 VLAN    
    • B. 把 MAC 地址指定给某个 VLAN  
    • C. 由 DHCP 服务器动态地为计算机分配 VLAN
    • D. 根据上层协议来划分 VLAN
  9. ● 下面哪个设备可以转发不同 VLAN 之间的通信? (61)

    (61)

    • A. 二层交换机    
    • B. 三层交换机
    • C. 网络集线器    
    • D. 生成树网桥
  10. ● 要进入以太端口配置模式,下面的路由器中命令,哪一条是正确的?(57)

    (57)

    • A.  R1 (config)# interface e0     
    • B.  R1 >interface e0
    • C.  R1 >line e0    
    • D.  R1 (config)# line s0