You are installing Windows 2000 Server on a new computer that has a hardware-based RAID array, a floppy disk drive, and a CD-ROM drive. The disk controller for the RAID array is not included on the current Hardware Compatibility List (HCL). You run Windows 2000 Setup by starting the computer from the Windows 2000 Server CD-ROM.
When the computer restarts at the end of the text mode portion of Windows 2000 Setup, you receive the following STOP error: "INACCESSABLE_BOOT_DEVICE ".
Which two actions should you take to eliminate the STOP error? (Choose Two)
A. Modify the Boot.ini file.
B. Restart Windows 2000 Setup by using the Windows 2000 Server CD-ROM.
C. Select Safe Mode from the Windows 2000 boot menu.
D. Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.
E. Install a driver for the RAID controller form. a floppy disk.
F. Use Device Manager to update the driver for the RAID controller.
-
You are the administrator of the homeoffice.local domain. You want to create a shared printer for the company's executives so that they do not have to wait for their documents to print when the default printer's queue contains a large number of documents.
You configure the new high-priority printer and want to set permissions for the groups shown in the exhibit. Note: The default settings have been cleared.
You select the check box to allow Print permission for the Executives group. You want only the Administrators, Print Operators, Server Operators, and Executives group to be able to print to the printer. What can you do? (Select all that apply).
- A．Remove the Everyone group.
- B．Select the check box to deny Print permission for the Everyone group.
- C．Select the check box to deny Manage Documents permission for Everyone group.
- D．Select all Deny check boxes for the Everyone group.
- E．Clear all check boxes for Everyone group.
-
You are installing Windows 2000 Server on a new computer that has a hardware-based RAID array, a floppy disk drive, and a CD-ROM drive. The disk controller for the RAID array is not included on the current Hardware Compatibility List (HCL). You run Windows 2000 Setup by starting the computer from the Windows 2000 Server CD-ROM.
When the computer restarts at the end of the text mode portion of Windows 2000 Setup, you receive the following STOP error: "INACCESSABLE_BOOT_DEVICE ".
Which two actions should you take to eliminate the STOP error? (Choose Two)
A. Modify the Boot.ini file.
B. Restart Windows 2000 Setup by using the Windows 2000 Server CD-ROM.
C. Select Safe Mode from the Windows 2000 boot menu.
D. Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.
E. Install a driver for the RAID controller form. a floppy disk.
F. Use Device Manager to update the driver for the RAID controller.
-
You are the network administrator for Ezonexam.com.
You create two shared printers on a Windows 2000 Server computer in Ezonexam.com Ezonexam. One printer is shared as Admin, and the other printer is shared as Executive. Both printers are connected to the same print device. You set the priority of the Admin printer to 90 and the priority of the Executive printer to 50.
You want all users at the Ezonexam network to be able to send print jobs to either printer. However, you do not want the Executive printer to appear in the browse list when employees other than executives and administrative assistants create a new printer connection on their client computers.
What should you do?
- A．Change the priority of the Executive printer to 99. Change the priority of the Admin printer to 1.
- B．Deny the Everyone group the Manage Printers permission.
- C．Change the printer configuration to Not Shared.
- D．Clear the List in the Directory check box in the printer configuration.
-
You are installing Windows 2000 Server on a new computer that has a single 10-GB SCSI disk. The disk controller is not included on the current Hardware Compatibility List (HCL). You start the computer by using the Windows 2000 Server CD-ROM.
When the computer restarts at the end of the text mode portion of Windows 2000 setup, you receive the following STOP error: "INACCESSIBLE_BOOT_DEVICE."
Which two actions should you take to eliminate the STOP error? (Choose Two)
- A．Restart the Windows 2000 Setup by using the Windows 2000 Server CD-ROM.
- B．Select Safe Mode from the Windows 2000 boot menu.
- C．Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.
- D．Install a driver for the SCSI controller from a floppy disk.
- E．Use Device Manager to update the driver for the SCSI controller.
-
You are the network administrator for Ezonexam.com. The file server for the accounting department is a Windows 2000 Server computer named Ezonexam1. You have created a folder named Payments on the system partition of Ezonexam1. Payments is shared on the network as Payments with the default share permissions. The owner of the Payments folder is domain Admins. The NTFS permissions are shown in the following table.
NTFS Permissions
Domain Admins: Allow Read
- Accounting: Allow Full Control There is a file called review.doc in the Payment folder. The owner of review.doc is a user named Paul who is on a temporary leave of absence. The NTFS permissions for the file list only Paul on the acc
- A．Take ownership of the file.
- B．Take ownership of the Payments folder.
- C．Grant Domain Admins Full control of the Payments shared folder.
- D．Grant Domain Admins Change for the Payments shared folder.
-
You are the network administrator for Ezonexam.com.
You are planning to install 10 new Windows 2000 Server computers. Ezonexam has a tight production schedule that requires no changes be made to the Active Directory except during scheduled outages. You schedule the installations during an upcoming network outage which will occur betweenmidnight and 8:00 A.M.
You want to complete the installations before production begins in the morning.
What should you do?
- A．Perform. the installations by using four floppy disks create with the Makebt32.exe utility.
- B．Perform. the installations by using four floppy disks create with the Makeboot.exe utility.
- C．Perform. the installations by using the Windows 2000 Installation compact disc.
- D．Perform. the installations by using the Windows 2000 Installation compact disc and a floppy disk containing a Winnt.sif file.
-
You are preparing to install Windows 2000 Server on a new computer. The computer is connected to a network that includes Windows 98 computers and Windows 2000 Server computers.
You want to install Windows 2000 Server from source files that are located on a server on the network.
What should you do?
- A．Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Winnt32.exe.
- B．Start the new computer by using Windows 98 network boot disk. Connect to the network server. Run Winnt.exe.
- C．On a Windows 2000 Server computer, use Makebt32.exe to create installation startup disk. Start the new computer by using the first disk.
- D．On a Windows 2000 computer, format a floppy disk. Copy NTLDR, boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.
高级经济师考试试题精选练习（1）
高级经济师考试模拟练习题之单选题（1
高级经济师考试试题精选练习（2）
高级经济师考试试题精选练习（3）
高级经济师考试试题：经济法案例试题精
高级经济师考试模拟试题及答案
高级经济师考试试题及答案：单选练习题
高级经济师考试试题：经济法案例试题精
高级经济师考试模拟题及答案练习(1)
高级经济师考试模拟题及答案练习(2)