From your Windows 2000 Professional computer, you need to map drive G to the default administrative share on drive C of a server named srv01.

Which command can you use?

You are the administrator of your company's network. You want to install Windows 2000 Professional on 10 non-PXE-compliant computers that are on the marketing segment of your network. You start one of the computers by using a RIS boot disk. However, you cannot connect to the RIS server.

You verify that existing client computers on the network can connect to network servers, including the RIS server. You discover that the network router does not support BOOTP. You want to enable the new computers to connect to the RIS server.

What should you do?

To answer, click the select and place button, and then drag the appropriate server to the place server here boxes on the network (Note: Both boxes must be filled. If a box does not require a server, use No server needed)

You are the administrator of your company's network. Your network has 20 Windows 2000 server computers in the contoso.com domain. Your network also has 250 Windows 98 computers. You want to perform. a clean installation of Windows 2000 Professional on all of the Windows 98 computers. All of the Windows 98 computers are identical models and are PXE complaint.

You want to accomplish the following goals:

1. An unattended installation of Windows 2000 Professional will be performed.

2. An unattended installation of company's standard applications will be performed during the installation of Windows 2000 Professional.

3. Each computer will be assigned a unique security identifier description.

4. The unattended installation script. will be modified so that the computers automatically join the contoso.com domain.

You take the following actions:

1. Install Windows 2000 Professional on a Windows 98 computer named computer1.

2. Install and configure computer standard applications on computer1.

3. Use Setup Manager on computer1 to create an unattended.txt file based on the current configuration including domain membership.

4. Start the remaining Windows 98 computers and then install Windows 2000 Professional. Use the unattended.txt file to provide the setting for the installation.

Which result or results do these actions produce? (Choose all that apply)

You are the administrator of your company's network. A user named Lilly prints dozens of documents daily from her Windows 2000 Professional computer. Lilly reports that she receives a dialog box announcing that each print job she sends has printed successfully.

Lilly's default printer is a shared printer that is connected to Windows 2000 Server computer. She wants to have this notification turned off because she prints so many documents.

What should you do?

Your company network includes 6,000 Windows 2000 Professional client computers and 35 Windows 2000 Server computers in a single domain.

Your company has a print device that is used to print payroll checks. The print device is physically attached to the parallel port of one of the client computers. This print device's tray is loaded with checks at all times. You have shared this printer on the network as ChkPrinter and retained the default permissions.

From your Windows 2000 Professional computer, you need to map drive G to the default administrative share on drive C of a server named srv01.

Which command can you use?

You are the system administrator for an electronics manufacturing company. The accounting department uses Windows 98 computers. The department has purchased a third-party spreadsheet application that only runs on Windows 2000 Professional. You need to upgrade the computers to Windows 2000 Professional and install the new application. You choose an unattended installation method for both the operating system and the application.

The Windows 2000 Professional installation files reside on a server named Ezonexamsrv in a shared folder named W2Ksource. You place the installation files for the spreadsheet application in \\Ezonexamsrv\W2Ksource\i386\$OEMS$. You create an answer file named Acctanswer.txt and place it in \\Ezonexamsrv\W2Ksource.

You map drive letter H: to \\Ezonexamsrv\W2Ksource and begin the installation on a test computer by running the winnt32 /s:H:\i386 /u:H:\acctanswer.text command.

Windows 2000 Professional is installed successfully. However, the spreadsheet application is not installed. You want to ensure that the spreadsheet application is installed during the unattended installation.

What should you do?

From your Windows 2000 Professional computer, you need to map drive G to the default administrative share on drive C of a server named AppSrv.

What can you do to map the drive?

You are the administrator for your company's network. The network is configured as shown in the exhibit.

You want to install Windows 2000 Professional on 20 new PXE-compliant computers on the marketing segment of your network. The new computers do not have operating systems installed.

You create a RIS image. You load the image onto the RIS server. You then start the new computers.

You find that the new computers cannot connect to the RIS server. You verify that the new computers cannot connect to the RIS server. You verify that the existing client computers in the network can connect to the network servers, including the RIS server. You want to enable the new computers to connect to the RIS server.

What should you do?

You need to install Windows 2000 Professional on 35 new computers on the company LAN.

First, you create a distribution folder on the network server. Then you create a network boot disk to install Windows 2000 Professional from the distribution folder.

Now you need to create a batch file, which the network boot disk will execute to start the installation. You must specify a source path and temporary drive for the installation files.

You also need to install the accessibility options within the batch file. The batch file must execute a hardware-specific application to run after the GUI-mode Setup has completed.

Which command must you specify in the batch file?