单选

Which statement about the deck line is TRUE ________．

A.The top of the deck line is marked at the highest point of the freeboard deck，including camber，at the midships point
B.A vessel with wooden planks on a steel deck will have the deck line marked at the intersection of the upper line of the wood sheathing with the side shell
C.The deck edge is marked at the intersection of the freeboard deck with the side shell，at the lowest point of sheer，with the vessel at even trim
D.On a vessel with a rounded stringer-sheer plate，the deck line is marked where the stringer plate turns down from the plane of the deck line

试题出自试卷《航海英语(甲类船长)船舶修理与保养单选题练习1》

参考答案

查看试卷详情

相关试题

You are testing the external inflation bladder on an immersion suit and find it has a very slow leak．Which action should be taken ________．
- A.Replace the suit
- B.Replace the inflation bladder
- C.Take it out of service and repair in accordance with the manufacturers instructions
- D.Some leakage should be expected and a topping off tube is provided; no other action is necessary
点击查看答案
You are moving a gas free tank barge to dry dock for repairs．The barge must have onboard a valid ______．
- A.Gas Free Certificate
- B.Certificate of Inspection
- C.Permit to Proceed and Hot Work Permit
- D.All of the above
点击查看答案
Why should you soak an anchor ________．
- A.It can prevent the anchor from slipping during pretensioning
- B.It will lubricate all the moving parts of a stock anchor
- C.It will increase the maximum breaking strength of the anchor chain
- D.It will make it easier to disassemble the anchor for repair
点击查看答案
Which statement about two lines spliced together is TRUE ________．
- A.Splicing is used to increase the circumference of each line
- B.Splicing two lines together is stronger than knotting two lines together
- C.Splicing is used to increase the overall strength of the line
- D.Splicing is used to prevent rotting of the lines bitter end
点击查看答案
Whipping the bitter end of a fiber rope ______．
- A.increases the circumference of the rope
- B.makes for easier handling
- C.prevents fraying of the bitter end
- D.prevents moisture from entering the bitter end
点击查看答案
Which statement about the deck line is TRUE ________．
- A.The top of the deck line is marked at the highest point of the freeboard deck，including camber，at the midships point
- B.A vessel with wooden planks on a steel deck will have the deck line marked at the intersection of the upper line of the wood sheathing with the side shell
- C.The deck edge is marked at the intersection of the freeboard deck with the side shell，at the lowest point of sheer，with the vessel at even trim
- D.On a vessel with a rounded stringer-sheer plate，the deck line is marked where the stringer plate turns down from the plane of the deck line
点击查看答案
Which statement about pneumatic chipping tools is TRUE ________．
- A.The operator must wear safety goggles or glasses
- B.The equipment must be grounded to prevent shock hazard
- C.The chipping mechanism is made of a non-sparking material that is safe to use near explosive atmospheres
- D.The needles of the needle-type chipping gun must be replaced when they have been blunted more than 1/2 of their diameter
点击查看答案
Which molten substance is poured into the basket of a wire rope socket being fitted to the end of a wire rope ________．
- A.Babbitt
- B.Bronze
- C.Lead
- D.Zinc
点击查看答案
Where do fatigue failures of wire rope mooring lines usually occur ________．
- A.In the middle part of the line length
- B.Near the socketed end fitting adjacent to the anchor
- C.At the point where the line touches the bottom
- D.At the place the anchor buoy is attached to the line
点击查看答案
Which bend or knot is used to tie a small line to a larger one ________．
- A.Becket bend
- B.Bowline
- C.Clove hitch
- D.Lark's head
点击查看答案