一起答
单选

Because of the close tolerances used in diesel engine fuel oil pumps, a worn plunger requires___________.

  • A.grinding the spare plunger to the barrel
  • B.replacing the plunger and the barrel
  • C.highly polishing both the plunger and barrel
  • D.replacing plunger only
试题出自试卷《海船船员考试轮机部三管轮模拟题8(轮机英语)》
参考答案
查看试卷详情
相关试题
  1. Because of the close tolerances used in diesel engine fuel oil pumps, a worn plunger requires___________.

    • A.grinding the spare plunger to the barrel
    • B.replacing the plunger and the barrel
    • C.highly polishing both the plunger and barrel
    • D.replacing plunger only
  2. To counteract these undesirable effects cylinder oils usually contain additives formulated to impart a high degree of _____ and detergency.

    • A.salinity
    • B.alkalinity
    • C.acid
    • D.sanitary
  3. When starting a reciprocating pump, the inlet valve should be ____.

    • A.closed
    • B.opened fully
    • C.cracked open
    • D.partly open
  4. Air conditioning is the process of treating air to control _____ its temperature, humidity, cleanliness and distribution to meet the comfort requirements of the occupants of the conditioned space.

    • A.instantaneous
    • B.instantaneously
    • C.simultaneous
    • D.simultaneously
  5. Increasing the speed of a centrifugal pump will result in an increase in its capacity in its capacityAnother means of increasing the capacity pump is to increase the .

    • A.diameter of the discharge piping, with all other factors remaining the same
    • B.diameter of the suction piping, with all other factors remaining the same
    • C.width of the impeller only
    • D.diameter of the impeller
  6. Misalignment of the drive shaft and propeller shaft flanges can be detected by using a dial indicator or ________.

    • A.inside micrometer
    • B.feeler gauge and straight edge
    • C.adjustable trammel
    • D.sighting device
  7. A hot air start pipe indicates that there is _____.

    • A.inefficient cooling
    • B.a leaking air start valve
    • C.a clogged drain valve
    • D.a leaking air bottle
  8. The component of a refrigerating system in which the refrigerant vaporizes and absorbs heat is known as the _____.

    • A.condenser
    • B.vapor generator
    • C.accumulator
    • D.evaporator
  9. To prevent the spread of fire by conduction, you should _____.

    • A.cool the bulkheads around the fire
    • B.remove combustibles from direct exposure
    • C.close all openings to the area
    • D.shut off all electric power
  10. If cylinder liner wear is up to maximum limits the possibility of scavenge fires will not be materially reduced until the liners are ______.

    • A.polished
    • B.renewed
    • C.adjusted
    • D.ground