单选

Deck machinery, which is also known as hull machinery, includes all power driven equipment located the machinery spaces that is with the main propulsion plant.

A.inside / associated
B.inside / not associated
C.outside / associated
D.outside / not associated

试题出自试卷《海船船员考试轮机部三管轮模拟题1(轮机英语)》

参考答案

查看试卷详情

相关试题

The inner part of the condenser should be cleaned with _____.
- A.gas oil
- B.diesel oil
- C.chemical compound
- D.Freon-12
点击查看答案
The purpose of an air compressor unloading device is to _____.
- A.drain water from the air receiver
- B.drain water from the cylinders
- C.delay the compression process until the motor is up to speed
- D.check pump alignment
点击查看答案
Governors are equipped with motors for synchronizing, load sharing and frequency control.
- A.speed setting
- B.load setting
- C.speed changing
- D.load setting
点击查看答案
Thermostatic expansion valves can be adjusted for _____.
- A.suction pressure only
- B.head pressure only
- C.superheat only
- D.suction pressure and box temperature
点击查看答案
Which of the listed characteristics of lube oil are the most important to the engineer from an operational standpoint?
- A.Ash content, carbon residue, and gravity
- B.Viscosity, acidity, and demulsibility
- C.Pour point, flash, point, and precipitation number
- D.Auto-ignition point, viscosity index, and film strength
点击查看答案
Deck machinery, which is also known as hull machinery, includes all power driven equipment located ______ the machinery spaces that is ______ with the main propulsion plant.
- A.inside / associated
- B.inside / not associated
- C.outside / associated
- D.outside / not associated
点击查看答案
A lube oil sample taken from the main engine lube oil system has dark yellow opaque colorThis is the result of .
- A.water contamination
- B.mixing oils of two widely different viscosities
- C.overheating
- D.aeration
点击查看答案
Each cylinder liner on the marine medium speed engines _____.
- A.is usually cooled by sea water
- B.can be replaced when worn out
- C.is in direct contact with the water in the bore of the cylinder
- D.can t expand when heated
点击查看答案
The space between cylinder liner and jacket is called _____.
- A.the circulating tank
- B.the scavenge box
- C.the cooling water space
- D.the cooler
点击查看答案
The crankshaft deflection is at first to be _____ before and after repair.
- A.disassembled
- B.renewed
- C.measured
- D.regulated
点击查看答案

Deck machinery, which is also known as hull machinery, includes all power driven equipment located ______ the machinery spaces that is ______ with the main propulsion plant.

Deck machinery, which is also known as hull machinery, includes all power driven equipment located the machinery spaces that is with the main propulsion plant.