一起答
单选

Any carbon built up on surfaces must be washed away by _____ additives and held in suspension by a _____ additive.

  • A.dispersant/detergent
  • B.detergent/dispersant
  • C.dispersant/dispersant
  • D.detergent/detergent
试题出自试卷《轮机部三管轮考试模拟题10(轮机英语)》
参考答案
查看试卷详情
相关试题
  1. Bearing knocks are likely to occur from _____.

    • A.less clearance
    • B.dirty lube oil
    • C.overload
    • D.bearing wear
  2. In a three-phase circuit, the phase voltages are _____.

    • A.120°apart
    • B.160°apart
    • C.180°apart
    • D.360°apart
  3. Which of the following will take place if the clearance of the main bearings are excessive?

    • A.bearing knocks
    • B.dropping of pressure of LO
    • C.noises
    • D.all the above
  4. The minimum fuel oil delivery pressure required for diesel engine injection depends primarily on the_________.

    • A.degree of cylinder air turbulence
    • B.firing pressure in the engine
    • C.quality of fuel to be injected
    • D.duration of the ignition delay period
  5. _____ or air venting arrangement is fitted to the fuel supply passage.

    • A.An air pump
    • B.A compressor
    • C.A fuel pump
    • D.A priming
  6. In the management of the shafting, because____ carry heavy load and caused high temperature easily, it should be paid attention.

    • A.the bearing near to the diesel engine
    • B.the intermediate bearing near to the thrust bearing
    • C.the intermediate bearing near to the sterntube
    • D.the bearing located at the middle of the diesel engine and the sterntube
  7. In a series circuit, which value will remain unchanged at all places in the circuit?

    • A.Voltage
    • B.Current
    • C.Resistance
    • D.Inductance
  8. The SMS should provide for _____ ensuring that the Companys organization can respond at any time to hazards, accidents and emergency situation involving its ships.

    • A.programs
    • B.progress
    • C.members
    • D.measures
  9. Any carbon built up on surfaces must be washed away by _____ additives and held in suspension by a _____ additive.

    • A.dispersant/detergent
    • B.detergent/dispersant
    • C.dispersant/dispersant
    • D.detergent/detergent
  10. Most large, low-speed, main propulsion diesel engines use duplex lube oil strainer to _____.

    • A.decrease the time required between cleanings
    • B.removes all large and small foreign objects
    • C.ensure a positive flow of oil at all times
    • D.ensure that all lube oil has been treated twice